skip to navigation
  • Luxfer PRD

    Luxfer PRD

    Our high-flow PRDs allow a faster release in case of an emergency.

  • Luxfer mounting strap

    Luxfer mounting strap

    These carbon steel brackets were specially designed for Luxfer GEN2 G-Stor Go cylinders to avoid product damage as cylinders expand while being filled to full pressure.

  • Luxfer end plug

    Luxfer end plug

    Lightweight 6061-T6 aluminum design.

  • Luxfer neck mount

    Luxfer neck mount

    Various mounting methods may be used with Luxfer cylinders.

PRDs (pressure-relief devices)

In addition to cylinders, Luxfer offers a superior line of valves and PRDs (pressure relief devices), including complete cylinder kits for AF applications. Our high-flow PRDs allow a faster release in case of an emergency.

Key features and benefits:

  • An extremely lightweight and compact valve with a 6061-T6 aluminum alloy body – up to 50% lighter than similar products.
  • Optional studs: fixed or indexable 370 degrees.
  • Low-torque for ease of use – up to 66% lower than similar products.
  • Includes Luxfer’s high-flow PRD (direct or vented). High-flow in and out (Cv = 2.0; flow equi. =0.277”/7.04mm orifice).

Additional features and benefits:

  • Optional excess-flow valve.
  • Available rig pin to lock lever in closed position.
  • Very low leakage (-50C O-rings).
  • Burst: 20,000 psi (1380 bar), 25% higher than other similar products on the market (higher burst ratings available with lower-flow PRDs).
  • 200-bar, 250-bar, 350-bar and 450-bar ratings.
  • 10,000 cycle life (ISO 15500-4, 250 bar).
  • Optional port for remote PRDs, gauges and sensors.
  • Compliance to CGA S1.1, NGV3.1, ECE R110 and ISO 15500.
  • Patent pending.


End-plug PRD

Features and benefits:

  • Extremely lightweight products achieved by using 6061-T6 aluminum alloy body (only 0.23 pounds).
  • Very low profile to maximize space (0.51 inches).
  • Available as axial and radial end plugs.
  • Very low leakage (-50C O-rings).


End plug

Features and benefits:

  • Lightweight 6061-T6 aluminum design.
  • Low profile.
  • Very low leakage (-50C O-rings).


Neck block mounts

For G-Stor Pro (Type 3) and G-Stor Go (Type 4) cylinders

Various mounting methods may be used with Luxfer cylinders. The mounting method and appropriate mounting hardware are often specified by the fuel-system manufacturer and may be supplied by Luxfer. Refer to applicable instructions and specifications provided by the fuel-system manufacturer or cylinder manufacturer before attempting to mount cylinders.

Luxfer’s 6061-T6 aluminum alloy neck-mount blocks are designed to allow cylinders to expand horizontally while being filled to full pressure.

Features and benefits:

  • Lightweight and corrosion-resistant.
  • Allows for cylinder expansion under high pressure.
  • Easy to install.


Strap mounts

For G-Stor Go (Type 4) cylinders

These carbon steel brackets were specially designed for Luxfer G-Stor Go cylinders to avoid product damage as cylinders expand while being filled to full pressure.

Features and benefits:

  • Strong carbon steel material coated for corrosion protection.
  • Specially designed for G-Stor Go 22-inch product range to allow for cylinder expansion without compromising cylinder integrity.
  • Easy to install.
  • Designed and manufactured to meet NFPA 52 G-loading requirements.

We respect your information and will never sell or pass on your email to 3rd parties. Please read our privacy policy.

It has come to Luxfer’s attention that a fraudulent website named ‘Luxfer.US’ has been established. This is not a Luxfer owned domain and none of its content has been generated by Luxfer. Within this fraudulent website, people have been encouraged to apply for an open Executive Assistant position, and this position DOES NOT EXIST. Luxfer is actively taking action to have this web-site taken down. We apologize any inconvenience this may have caused any innocent parties caught up in this fraudulent activity. ×